T.D. Sawvel Company, Inc. Your source for food packaging and container filling. We develop and manufacture Time Fillers, Piston Fillers, Volumetric Fillers, Scale Fillers, Lidders, Sealers, Denesters and other custom packaging solutions.

| A-D | E-R | S-Z |

TERM	DEFINITION
ELECTRIC EYE CONTROLS	PHOTOELECTRIC SENSORS ARE USED TO SIGNAL THE FILL STATION AS THE CONTAINERS MOVE INTO THE FILL POSITION. THESE SENSORS ARE NEEDED FOR AUTOMATIC MACHINE OPERATION.
EXTRA SET OF TOOLING	ONE SET OF TOOLING FOR ONE SIZE CONTAINER IS SUPPLIED WITH THE MACHINE. AN EXTRA SET OF TOOLING IS NEEDED FOR EACH ADDITIONAL SIZE CONTAINER. SOME MODELS CAN BE TOOLED FOR MANY DIFFERENT SHAPES AND SIZE CONTAINERS.
HALF & HALF DIVIDER	A STATIONARY DIVIDER THAT ALLOWS ICE CREAM TO FLOW INTO THE CONTAINER FROM TWO SEPARATE ICE CREAM LINES.
HOPPER	A LARGE RESERVOIR CONTAINING THE PRODUCT TO BE FILLED.
HOT FILL RAILS	RAILS THAT SUPPORT THE SIDES OF THE CONTAINER WHEN LIDDING CONTAINERS FILLED WITH HOT PRODUCTS. THIS SUPPORT PREVENTS CONTAINERS FROM COLLAPSING.
LEFT HAND MACHINE	WHILE FACING THE FRONT OF THE MACHINE, A LEFT HAND MACHINE DENESTS CONTAINERS ON THE RIGHT SIDE OF THE MACHINE. THE CONTAINER MOVES TO THE LEFT TO BE FILLED AND LIDDED. THE FILLED CONTAINER THEN EXITS THE MACHINE ON THE LEFT SIDE.
LID PLACER	THIS UNIT PLACES THE LID ON TOP OF THE CONTAINER. THE CONTAINER THEN MOVES TO THE LID PRESS. THE LID PLACER ALONG WITH THE LID COMPRESSION UNIT MAKES A FULLY AUTOMATIC LID PRESSING UNIT.
LID SPINNER TOOLING	TOOLING REQUIRED TO RUN ONE SIZE LID THROUGH THE LID SPINNER FEATURE ON THE MODEL #115 LIDDERS.
LID CHUTE TOOLING	TOOLING REQUIRED TO RUN ONE SIZE LID THROUGH THE LID SECTION ON STANDARD MODEL #115 LIDDERS.
LID ORIENTER	A UNIT TO ORIENT LIDS SO THAT THE POUR SPOUT IS IN A CONSTANT LOCATION.
LUMENITE LEVEL CONTROL	LUMENITE BRAND LEVEL CONTROL FOR THE PRODUCT HOPPER.
MEMBRANE / FOIL SEAL SECTION	THIS SECTION PLACES AND SEALS A PIECE OF FILM OR FOIL ON TOP OF THE CONTAINER PRIOR TO LIDDING.
NEAPOLITAN ADAPTER	AN ADAPTER THAT ALLOWS THREE DIFFERENT FLAVORS OF ICE CREAM TO BE FED INTO ONE ICE CREAM LINE AND THEN INTO THE CONTAINER. TUB SPINNERS ARE NORMALLY NOT USED WITH THE NEAPOLITAN ADAPTER.
REVEL ADAPTER	A STATIONARY ADAPTER THAT ALLOWS ONE FLAVOR SYRUP TO BE INJECTED INTO THE ICE CREAM AS THE ICE CREAM FLOWS INTO THE FILLING MACHINE. THIS IS THE MOST BASIC WAY TO INJECT A FLAVORED SYRUP INTO ICE CREAM. THIS ADAPTER MUST BE USED WITH THE TUB SPINNERS TO CREATE A SWIRL PATTERN.
RIGHT HAND MACHINE	WHILE FACING THE FRONT OF THE MACHINE, A RIGHT HAND MACHINE DENESTS CONTAINERS ON THE LEFT SIDE OF THE MACHINE. THE CONTAINER MOVES TO THE RIGHT TO BE FILLED AND LIDDED. THE FILLED CONTAINER THEN EXITS THE MACHINE ON THE RIGHT SIDE.

< BACK | NEXT >