Glossary of Terms

AIR BURPER ATTACHMENT

THIS UNIT ELIMINATES AIR POCKETS THAT MAY BE BETWEEN THE LID AND THE PRODUCT.

2" BALL VALVES

THIS TYPE OF VALVE IS USED FOR FILLING LIQUID PRODUCTS WITH CHUNKS SUCH AS PIE FILLING.

BLENDER-MODEL #107B

AN AIR OR ELECTRICALLY POWERED UNIT THAT BLENDS ICE CREAM OR SIMILAR PRODUCTS FROM TWO DIFFERENT SOURCES. THIS UNIT ASSURES EVEN CONSISTENCY IN THE PRODUCT.

BOTTOM-UP®

SAWVEL'S EXCLUSIVE VOLUMETRIC FILLING PRINCIPLE. EACH CONTAINER IS FILLED FROM THE BOTTOM TO THE TOP. THIS ELIMINATES AIR GAPS IN THE PRODUCT.

BY-PASS VALVE FOR ICE CREAM OR SYRUP

THESE VALVES ARE USED TO ALLOW THE PRODUCT (S) AND/OR FLAVORS TO BE DIVERTED AWAY FROM THE MACHINE BACK TO SEPARATE TANKS OR LOCATIONS DURING MOMENTARY INTERRUPTIONS IN PRODUCTION. THESE VALVES CAN BE SET UP TO RUN AUTOMATICALLY.

CONTINUOUS FLOW

THIS FEATURE ALLOWS ICE CREAM TO FLOW WITHOUT STOPPING DURING THE TRANSFER OF THE CONTAINER INTO AND OUT OF THE FILL STATION.

DATE CODER

THIS UNIT STAMPS TWO LINES OF CODE ONTO THE CONTAINER. THE CODE CAN CONSIST OF THE DATE, PLANT NUMBER, BATCH NUMBER, ETC.

DELUXE NEAPOLITAN

A STATIONARY ADAPTER ALLOWING THREE FLAVORS OF ICE CREAM TO FLOW INTO THE CONTAINER FROM THREE SEPARATE ICE CREAM LINES. THIS ADAPTER KEEPS THE ICE CREAM SEPARATED UNTIL IT ENTERS THE PAIL. IF PRODUCT DISPLAY IS CRITICAL, THIS IS THE BEST WAY TO ASSURE CLEAR SEPARATION BETWEEN THE THREE FLAVORS.

DELUXE REVEL

A STATIONARY ADAPTER THAT INJECTS ONE FLAVORED SYRUP INTO THE ICE CREAM JUST AS THE ICE CREAM IS BEING PUT INTO THE CONTAINER. THIS ADAPTER WAS DESIGNED SO THAT THE SYRUP CAN BE EASILY SEEN THROUGH CLEAR, ROUND, PLASTIC CONTAINERS. IF PRODUCT DISPLAY IS CRITICAL, THIS IS THE BEST WAY TO ASSURE EVEN SYRUP DISTRIBUTION. THIS ADAPTER MUST BE USED WITH THE TUB SPINNERS TO CREATE A SWIRL PATTERN IN THE ICE CREAM.

3"x 2-1/2" DIVERTER VALVE

THIS DIVERTER VALVE IS LARGER THAN THE STANDARD MODEL #1000 VALVE. THIS ALLOWS FOR MORE GALLONS OR LITERS OF ICE CREAM TO BE FILLED PER HOUR. SPEEDS RANGE FROM 1700 GPH (GALLONS PER HOUR) TO 2400 GPH OR APPROXIMATELY 6000 LPH (LITERS PER HOUR) TO 9100 LPH WITH THIS OPTION.

DRIP COVERS

COVERS NECESSARY TO PREVENT CONDENSATION FROM DRIPPING INTO THE CONTAINERS.

TOP DRIVEN ROLLERS NECESSARY FOR LIDDING 5 POUND TUBS ON THE MODEL #115 LIDDER. THESE ROLLERS ASSURE CONTAINER STABILITY AS THE TUBS ENTER THE LIDDING SECTION.